 |
32 Gallon Drum
The thermogram documents the dramatic level of heat being generated by the exothermic reaction of sodium hydrosulfite and water in a 32 gallon drum.
|
 |
Engine Block
Cooling process in engine block molding.
|
 |
Heated Car Seats
Inspecting heated car seats.
|
 |
Injector
High injector temperatures can indicate plugging. A plugged injector will show very hot on an infrared scan. Pinpointing the problem before it...more
|
 |
Mold temperature
Mold temperature in an automotive seat.
|
 |
Motor
Internal winding problem.
|
 |
Polypropylene Kettle after Boiling
Note the water level is clearly indicated. Thermography can be used for product testing to ensure no part of a product surface reaches dangerous...more
|
 |
Process equipment condition
This thermal image details a 499º F hot spot on this heat exchanger.
The IR camera can also provide early warning of problems or incipient failures in...more
|
 |
Refractory lined equipment
Furnace refractory breakdown a crude heater stack is clearly shown in this thermal image. unchecked, the condition can to accelerated metal...more
|
 |
Steel Slab
Left Image: This slab had no water for cooling. There are no stripes from improper headers.
Right Image – New headers were installed to...more
|
 |
Tubular bus
Bolted connection problem
|
 |
Wafer Board
This is an annealing process for wafers. Thermography can quickly identify thermal irregularities on critical parts.
|
 |
Water Pump Starter
The heater portion of the starter had a reading of 188.7°F. The pump was also very hot, indicating that it is in need of...more
|
 |
Windshield Washer Fluid Pump
It appears the coupling has failed or is out of alignment.
|
